Overspeed Governors

Service Image

Overspeed Governor Type R6R With Contact

Pulley diameter: 300. Small size base. Certified TUV. To law TRA and EEC EN 81. Nominal speed up to 1.82 m/sec. Tripping speed up to 2.10 m/sec.
Service Image

Tendion Weight For Overspeed Governors

Tendion weights R4 diameters: 200, 260, and 300. Available with or without contact included cast iron counterweight to combine with corresponding overspeed governors. To law TRA and EEC EN 81.
Service Image

Instantaneous Safety Gear Blocks

Type C1 for lifts and type C2 for goods-lifts. Other types available: SP 50 - SP 50/B - SP/60 for guides from 6 to 16 mm, certified TUV, to law TRA and EEC EN 81.
Service Image

Rope Anchorages 12 MA - 16 MA - 20 MA

Available at various lengths for ropes from 6 to 15 mm. With or without spring. Available with eyebolts only.
Service Image

Guide Shoes

For maximal leads from 1000 kg up to 7000 kg. With Perlon guarniture for guides from 6 to 16 mm. Available with brass guarniture for guides of 16 mm and over.
Service Image
Service Image




Standard Director Pulleys

Assembled with ball bearings or bush. Available with fixed or dismountable shaft for keeper plates or with supports.
Diameter (mm) Number of Ropes Rope Diameter (mm) Static Load (kg)
320 - 750 4 - 8 8 - 13 1,700 - 6,300
500 - 650 4 - 8 12 - 16 2,300 - 10,000





Little Pulleys For Food-Lifts

Type with diameter of 250 mm - 2 ropes - with bush and shaft for keeper plates or with supports. Type with diameter of 300 mm - 3 or 4 ropes - with ball bearings and shaft for keeper plates or with supports.

Service Image
Service Image







Divertor Pulleys For High Static Load

Assembled with ball bearings or roller bearings, available with fixed or dismountable shaft for keeper plates or with supports.







Diameter (mm) Number of Ropes Rope Diameter (mm) Static Load (kg)
400 - 600 2 - 4 10 - 11 1,400 - 4,200

Traction Pulleys
Hub with housing for spline. Diameter of the hole is to customer's request because of different utilizations. Also available with taper hole.
We also produce traction pulleys with interchangeable hubs (flanged type).

Logo-fin.png

220 Scoles Avenue

Clifton, NJ 07012

Phone: 973-471-1200

Fax: 973-471-1440

Daniel@amerivator.com

©2018 AMERIVATOR All rights reserved

Search